Synchronizes pulse picking device and/or regenerative amplifier with incoming optical (electrical) pulse train
Synchronizing control board designed for pulse picking applications and regenerative amplifier control in laboratory
PP-CONTROL was designed for pulse picking applications and regenerative amplifier control in laboratory. It synchronizes pulse picking device and/or regenerative amplifier with incoming optical (electrical) pulse train.
Once the device is powered (5 V via USB) and enabled, it generates two independent output TTL signals precisely aligned relatively to SEED IN incoming signal. Parameters of output pulses are set via software and stored in the device's memory.
Input pulses repetition rate typically lays between 10 MHz and 100 MHz. Output repetition rate is possible from single pulses to 1 MHz.
The device can be supplied either as printed board (PCB) or as enclosed module.
